CB Radio Accessories

K-PO SX-20 – SWR meter 1.8MHz – 200MHz

Featuring cross needle design for measuring SWR and output power simultaneously.

Compact size makes it very useful for testing mobiles as well as base station installation.

Specification:
Frequency: 1.8 – 200 Mhz
Impedance: 50 Ohms
Power Range: 30 – 300 Watts
Power Accuracy: 10% @ Full Scale
Min Input Power: 2 Watts
Connector: UHF (SO239-Type)
Dimensions: 85x87x95mm

Price: £39.95


Zetagi 203 Twin SWR Watt Power Meter

A sturdy twin instrument meter designed to measure v.s.w.r. (3-200 MHz) and power (26-30 MHz) separately, it has a three position switch to measure power readings at up to 10W, 100W, or 1KW.

Price: £39.95


K-PO SWR 420

A basic SWR meter at an affordable price.

This meter is ideal for new CB setups or for general CB radio use.

  • Basic SWR Meter
  • Frequency: 27 MHz (CB Radio)
  • Precision 5%
  • Connection via PL259 Patch lead
  • SWR Instructions Included
  • 85 x 56 x 60mm

Price: £11.95


K-PO SWR 430

A low cost SWR meter with built-in power meter for testing the output power of a CB radio.

This meter is ideal for new CB setups or for general CB radio use.

  • SWR Meter / Power Meter
  • Frequency: 27 MHz
  • Precision 5%
  • Power Meter: Max 100 Watts
  • Connection via PL259 Patch lead
  • SWR Instructions Included
  • 85 x 56 x 60mm

Price: £13.95


ZETAGI V2 2 POSITION ANTENNA SWITCH 500W

A durable 2 position antenna switch with high power handling.

Technical Specifications:

Power Handling 500 W
S.W.R. < 1.2:1
Frequency 0-30 MHz
Size 60mm (w) x 105mm (h) x 38mm (d)

Price: £15.95


ZETAGI DL50 50W DUMMY LOAD

A heavy duty dummy load suitable for use on transceivers up to 500 MHz, maximum power handling 50 watts.

 

 

Price: 19.95

 


ZETAGI AX2 DUAL ANTENNA COUPLER 2-30MHZ, 200W

An alternative to a co-phase harness, this coupler allows two antennae to be used at the same time and converts the impedance of both to match a single transceiver.

Technical Specifications:

Frequency coverage 2-30 MHz
Max. Power handling 200W
Dimensions 60mm (W) x 100mm (H) x 35mm (D)

Price: £19.95


SHARMAN’S DM520P1 COFFIN MIC WITH 4PIN PLUG (STANDARD)

”Coffin” shaped popular hand-held microphone, suitable for all types of radio communication equipment. Available without plug or with plug connected for various different CB radios wiring codes. Please ensure to quote correct order code.

with 4pin plug wired for Cybernet wiring CB radios

Technical Specifications:

Type Omni-directional dynamic
Sensitivity -76dB +/- 4dB
Impedance 500 ohm at 1 KHz
Frequency Response 200-5 KHz
Cable 6ft curly rubberised cable (3 core + 1 shield)

Price: £7.95


K-PO NM532 POWER MICROPHONE WITH LEVEL ADJUSTMENT

This is the replacement for the DM510 power microphone

The NM532 is a basic power mic with level adjustment. Fitted with a 6-pin connector.

Features

Omni Directional
Electric Condenser
Slide Power Control
“On Air” LED

Specification

Sensitivity : -42dB (at 1 KHz)
Impedance : 1 KOhm (at 1 KHz)
Frequency : 300Hz – 6KHz
Cable : 1.8M Spring Cord

Price: £19.95


SIRIO MAG3/8 ADAPTOR PL-3/8 CONVERTS SO239 TO 3/8 FITTING

 

 

 

 

 

Price: £6.50


SIRIO 3/8 DV BASE N SUITABLE FOR 3/8 FITTING ANTENNAE

Very popular, very high quality, Sirio body mount designed to take a 3/8 threaded whip. See the accessories tab for the cable and connectors to suit this mount.

 

 

 

Price: £3.95


3/8 TO DV ADAPTOR – CONVERTS 3/8″ MOUNT TO DV STYLE FIT

 

 

 

Price: £1.95


SW DV-PL ADAPTOR – CONVERTS DV FIT TO PL FITTING

PL259 UHF plug to DV ring adaptor

 

 

 

Price: £4.95


SW DV BASE PLUG CONNECTOR TO FIT ON DV LEAD

Plug to connect antenna lead to base of any DV mount ”N” or ”N 3/8”.

 

 

Price: £1.95

 


105ADT HEAVY DUTY STUD MOUNT 3/8 FIT

Top quality chrome plated brass stud mount with heavy duty nickel-plated PL259 connection from the bottom, suitable for 3/8” x 24 thread CB antennae.

 

 

 

Price: £3.95


SHARMAN’S 142AD H/DUTY SURFACE MOUNT

Heavy duty roof and flat surface mount. Designed to mount on roof, wing, or trunk etc. of cars, vans, trucks,etc. Accepts standard 3/8” x 24 thread antennae.

 

 

 

Price: £4.95


SHARMAN’S MB-700 GUTTER / MIRROR MOUNT ANTENNA BRACKET

Gutter mount bracket with a 16mm diameter hole to take various types of antenna mount, this unit can also fit around certain roof rack rods.

 

 

Price: £14.95


SHARMAN’S MB-800 HATCHBACK / TRUNK MOUNT ANTENNA BRACKET

A taller hatchback or trunk-lip mount bracket with a 16mm diameter hole to take various types of antenna mounts. Actual bracket can be adjusted with Hex key to fit at various desired angles, and is finished in black colour.

 

Price: £14.95


SIRIO PL DV BASE (N-PL AS MNT) SUITABLE FOR PL FITTING ANT

Very durable mount, similar in style to conventional DV base, but designed to accept antennae fitted with a PL screw thread on to DV style base. Requires 13mm hole.

 

 

Price: £3.95


SW UNIVERSAL HATCHBACK MOUNT KIT

Complete pre-assembled adjustable hatchback mount with 4mtrs RG58 cable and PL259/6 plug.

 

 

 

Price: £11.95


SIRIO DV BASE N FOR WING NUT MOUNTING ANTENNAE

Very durable mount suitable for all DV style antenna. Requiring to be connected to this style mount with a wing nut.

Can mount directly to body of vehicle or to most gutter mounts. Requires 13mm hole for mounting.

 

 

Price: £3.25


SIRIO WING NUT AND BOLT

Wing nut and bolt for connecting DV style antennae to DV base ”N”.

 

 

 

Price: £1.50


CB2 POWER LEAD ROTEL DC P/LEAD 2 PIN

Heavy duty 20 gauge DC power cord with 2pin moulded connector, complete with fuse holder and 2amp fuse. Suitable for Cybernet and other similar CB transceivers.

 

 

 

Price: £2.50


CB3 POWER LEAD UNIDEN DC /CORD 3 PIN

Heavy duty 20 gauge DC power cord with 3pin moulded connector, complete with fuse holder and 2amp fuse. Suitable for Uniden and other similar CB transceivers.

 

 

 

Price: £2.50


SW CLP1 CIGAR LIGHTER PLUG 2 SECTION

Standard 2 section cigarette lighter plug, unfused.

 

 

 

Price: £1.50


YKB13 CIGAR LIGHTER Y ADAPTOR 1 PLUG TO 2 SOCKETS

Twin splitter for standard plug The sockets are separate from each other giving greater flexibility 24 or 12v 10amp rated.

 

 

 

Price: £4.95


SW 7-25 PRO COMMUNICATIONS SPEAKER

A very popular communications speaker designed to be robust. A 2 x 3 1/2” speaker contained within a compact ABS plastic cabinet, complete with swivel mounting bracket and 6ft cord with 3.5mm jack plug.

Technical Specifications:

Impedance – 8 ohm
Power Handling – 7 W max.
Speaker – 2 x 31/2”
Cord Length – 6ft with 3.5mm plug
Size – 100mm (w) x 75mm (h) x 65mm (d)

Price: £8.50


2 INCH MAST COUPLER WITH 10 BOLTS

 

 

 

 

Price: £15.00




11yIn business
And still going!

 


Opening hours

Monday - Friday 9.30am until 5.00pm

logos


Contact

Telephone 01472 601896
102 St Peters Avenue
Cleethorpes
N. E. Lincs DN32 8HX
sales@cleethorpescomputercentre.co.uk


All major credit cards accepted

cards